| Performance
Rated power (Pmax) 10W
Power tolerance ± 10%
Nominal voltage 12V
Limited Warranty 2 years
Configuration
Multi-mount frame with lo-pro J-Box and output cable
Clear universal frame and standard J-Box
Electrical Characteristics
Maximum power (Pmax)3 10W
Voltage at Pmax (Vmp) 16.8V
Current at Pmax (Imp) 1.19A
Warranted minimum Pmax 18W
Short-circuit current (Isc) 1.29A
Open-circuit voltage (Voc) 21.0V
Temperature coefficient of Isc (0.065±0.015)%/ °C
Temperature coefficient of Voc - (80±10)mV/°C
Temperature coefficient of power - (0.5±0.05)%/ °C
NOCT (Air 20°C; Sun 0.8kW/m2 ;
wind 1m/s)
47±2°C
Maximum series fuse rating 3A
Maximum system voltage 50V (US NEC rating)
50V (IEC 61215 rating)
|
Mechanical Characteristics
Dimensions
Length: 421mm (16.6") Width: 501mm (19.7") Depth: 23mm (0.9")
Weight 2.5 kg (5.5 pounds)
Solar Cells 36 cells (38mm x 114mm) in a 4x9 matrix connected in series
Junction Box box with 4-terminal connection block; IP 65, accepts PG 13.5,
M20 ½ inch conduit or cable fittings accepting 6-12mm diameter cable.
Terminals accept 2.5 to 10mm2 (8 to 14 AWG) wire Output Cables
AWG# 18 (0.75mm2) 2 core ITC/PLTC; length - 4572mm
Construction Front: High-transmission 3mm (1/8th inch) tempered glass;
Back: Polyester Encapsulant: EVAFrame
Clear anodized aluminum alloy Multi-mount frame;
Colour: silver
Qualification Test Parameters
Temperature cycling range -40°C to +85°C (-40°F to 185°F)
Humidity freeze, damp heat 85% RH
Static load front and back (e.g. wind) 2,400 pa (50psf)
Front loading (e.g. snow) 5,400 pa (113psf)
Hailstone impact 25mm Ø (1 inch) at 23 m/s (52mph)
Quality and Safety
Manufactured in ISO 9001-certified factories; conforms to European Community Directives 89/33/EEC, 73/23/EEC, 93/68/EEC; certified to IEC 61215
Module power measurements calibrated to World Radiometric Reference through ESTI (European Solar Test Installation at Ispra, Italy)
Listed by Underwriter’s Laboratories for electrical and fire safety
(Class C fire rating)
Approved by Factory Mutual Research in NEC Class 1, Division 2,
Groups C & D hazardous locations.
|